TO THE QUESTION OF PREDICTING THE HARDENING OF COMPOSITIONS OF LIGHT CARBONATE SLAG CONCRETE

Authors

  • Ya.V Vologzhanina Zaporizhia Polytechnic National University, Zaporizhia
  • O.M. Nazarenko Zaporizhia Polytechnic National University, Zaporizhia
  • A.O., Berezovska Zaporizhia Polytechnic National University, Zaporizhia
  • V.I. Zalievskyi Zaporizhia Polytechnic National University, Zaporizhia
  • O.O., Lifanenkov Zaporizhia Polytechnic National University, Zaporizhia
  • O.G., Klytniy Zaporizhia Polytechnic National University, Zaporizhia

DOI:

https://doi.org/10.31713/budres.v0i45.01

Abstract

On the eve, hydraulic binding properties were discovered in compounds of alkali metals, lithium, sodium, potassium, rubidium, cesium, on the basis of which alkaline and alkaline earth binders were developed. Slag cement products are a special case of such binders. The use of concretes on slag-alkaline cements allows you to increase the brand of cements, as well as to expand the range of aggregates, to reduce the consumption of fuel, energy, and transportation means. New technologies for the production of silicate structures are being developed, based on new hydraulically binding and contact hardening concrete mixtures. It is based on the production of products that allow to give them strength and water resistance at the time of pressing. This phenomen was called the effect of ordering the structure of silicate systems. The method made it possible not only to fundamentally change the technology of concrete stone synthesis, to exclude formwork from the production of the structure, but also to significantly reduce the time of onset of water resistance, to maximally mechanize and automate production. The technology of obtaining contact hardening concrete opens up unlimited possibilities for improving the production of building structures, as well as for expanding the raw material bases of construction due to the use of local dispersed soils, silicate and alkaline industrial waste. Composite binder based on ground slag and carbonate rocks, capable of forming strong structures by their activation, allows to reduce the cost of production of building materials, wall blocks, bricks, facing tiles. The solution of the technological scheme of some energy-intensive and ecologically polluted processes, the expansion of the local cheap raw material base leads to the saving of raw materials, fuel resources, electricity and the preservation of environmental cleanliness. A significant scale can be provided by new developments of construction products, tiles, bricks, blocks for industrial and private construction.

 

Published

2024-06-22

Issue

Section

Статті